ECS C6 Alky Control Methanol System

$654.00$734.00

-

Alkycontrol Methanol Injection kit for the C6 Corvette platform. This is the best kit on the market for the C6. Plenty of reading and feedback at www.corvetteforum.com. Features Custom made hoses, fittings, wiring, instructions etc. Modified Pump 250+ PSI

Description

Ready for the next level in your supercharging experience? ECS Alky Control Systems are designed for reliable, safe and proven fuel delivery.

Methanol is a highly effective addition to your supercharged car for a number of reasons. First and foremost, Methanol injection is a highly efficient chemical intercooler. By injecting methanol into the inlet of a supercharged car, intake air temperatures (IAT’s) can be reduced by more than 80% (depending on ambient air temperatures) and allow your tuner to run more timing and therefore making more HP. Secondly, Methanol burns at the equivalent of 110 octane fuel, effectively halting detonation that can be present with lower octane fuels and finally Methanol works to keep your engine cleaner, and helps remove carbon deposits that can form on piston tops, which can effective change engine compression and combustion properties.

ECS Alky Control Systems come with a boost referenced, progressive meth controller which automatically releases increasing amounts of methanol as boost increases. This progression ensures smooth and even fuel delivery so that the transition or power remains smooth all the way up to redline.

ECS Alky Control Systems use only the best components. Braided Stainless Steel Lines, a High Volume Methanol specific pump, sealed electrical connectors and brass fittings.

Used properly, an ECS Alky Control System can add reliability, power and stability to your supercharged car.

Alkycontrol Methanol Injection kit for the C6 Corvette platform. This is the best kit on the market for the C6. Plenty of reading and feedback at www.corvetteforum.com. Features Custom made hoses, fittings, wiring, instructions etc. Modified Pump 250+ PSI on M15 and water with cover to prevent any water from intruding into pump Progressive controller preset for the C6 LS based platform.

GM Delco 2 bar MAP sensor with regulator to read boost and supply signal to controller. Same sensor can be utilized for SD conversions. 3 teflon lined braided hoses with pressed on ends custom length. Hose feature AN fittings. Meaning a wrench is needed to install and secure hoses. No push-in deal. This is a complete kit. Down to the OEM grommets that are replaced on the reservoir, cap for reservoir, plug for tank, stainless steel hardware to mount pump, vehicle specific instructions, etc. Pre-taped pump fittings 90 micron in-line filter M15 15 GPH Nozzle.

Additional information

Weight 11 lbs
Dimensions 8 × 8 × 6 in
Upgrade to Twin Nozzle Kit

,